Add your header text here

Get to know the School

Headquarters

+300 Teachers

Featured programs

Master

E-learning

E-learning

Master

E-learning

E-learning

Programs

What our students say

What our teachers say

Success stories

Aviation maintenance management amid the technician shortage: challenges, spare parts and the leadership roles MROs need

News
Alumna de ITAérea atenta durante una clase presencial del máster

Opinion piece · Reading time ~12 min

By the ITAérea faculty · Updated: November 2026

An aircraft is not ready to fly when the missing part arrives. It is ready when a licensed technician signs off the work. Today both are in short supply, and the signature is the harder of the two to secure.

That is why we see the technician shortage as a question of aviation maintenance management first: in any hangar, certifying staff set the capacity. This article looks at the 2026 data, at what the shortage does to hangars and spare parts, at the leadership roles it calls for and at how to move into management. It closes with the professional opportunity we see in all of this.

In 30 seconds

  • Aviation maintenance management decides what is maintained, when, by whom and with which parts.
  • Boeing forecasts demand for 728,000 new maintenance technicians between 2026 and 2045, including 65,000 in the Middle East and 25,000 in Africa.
  • Two out of three professionals surveyed by Oliver Wyman in 2026 find it hard to recruit technicians.
  • Certifying staff limit how much work an organisation can take on, which makes the shortage a management issue.

Contents

What aviation maintenance management is and who does it

Aviation maintenance management is the set of decisions that keeps every aircraft airworthy and available when operations need it: which tasks are carried out, when, in which organisation, by which certifying staff and with which parts, within a framework set by the aviation authority.

It sits with management: it decides when each aircraft goes into the hangar and with what resources. The technical side is covered on our aeronautical maintenance page.

MRO (Maintenance, Repair and Overhaul) refers both to the industry and to the companies that maintain aircraft, engines or components. Other abbreviations are explained in our maintenance and airworthiness acronyms.

MRO, CAMO and Part-145 organisation: who decides and who executes

The clearest model is the European one. Regulation (EU) No 1321/2014 divides the work between the CAMO (Continuing Airworthiness Management Organisation), the Part-145 approved maintenance organisation and the operator. Aircraft maintenance is generally certified by staff holding a Part-66 aircraft maintenance licence.

CAMO Maintenance organisation (Part-145 / AMO) Operator (airline)
What it does Manages continuing airworthiness: maintenance programme, directives, records; decides what must be done and when Performs the maintenance and certifies release to service Is responsible for the airworthiness of its fleet; contracts or integrates the CAMO and the maintenance
EU rule Regulation (EU) No 1321/2014, Part-CAMO Regulation (EU) No 1321/2014, Part-145 Regulation (EU) No 1321/2014, Part-M
Key personnel Accountable manager, continuing airworthiness manager Accountable manager, nominated persons, certifying staff with a Part-66 licence Technical management (common practice)

The regulatory framework around the world

Within Europe, EASA (European Union Aviation Safety Agency) sets the common rules and national authorities apply them; in Spain, for instance, AESA approves Part-145 organisations and CAMOs and issues Part-66 licences.

Outside Europe the labels change. In the United States, maintenance organisations are certificated as repair stations under FAA (Federal Aviation Administration) Part 145, and mechanics hold the Airframe and Powerplant (A&P) certificate. In the Gulf, the UAE’s General Civil Aviation Authority (GCAA) and Saudi Arabia’s General Authority of Civil Aviation (GACA) approve maintenance organisations under their own national regulations. In much of South America, the SRVSOP (Regional Safety Oversight Cooperation System) developed LAR 145, a regional rule for these organisations that each country brings into national law.

Whatever the labels, the split between those who decide and those who execute is the same everywhere. So is the scarcity on both sides: qualified people.

The MRO talent crisis: what the 2026 data says

Yes, there is a shortage of aircraft maintenance technicians, and it is growing. Boeing forecasts that 728,000 new technicians will be needed between 2026 and 2045, and that two thirds of all personnel demand (pilots, technicians and cabin crew) will come from retirements. MRO companies say recruiting technicians, often called aircraft mechanics, keeps getting harder.

How many maintenance technicians will be needed? Boeing’s forecast by region

The 2026 edition of Boeing’s Pilot and Technician Outlook, published in July, breaks down technician demand as follows:

Region (Boeing’s naming) New maintenance technicians 2026–2045
World 728,000
Eurasia 169,000
North America 125,000
Middle East 65,000
Latin America 42,000
Africa 25,000
China, rest of Asia and Oceania (our own sum of Boeing’s regions) 302,000

Source: Boeing press release, July 2026. “Eurasia” is a Boeing region and is not the same as “Europe”.

Taken together, the Middle East and Africa account for 90,000 of those technicians, more than Latin America and Oceania combined.

What maintenance organisations themselves admit

Oliver Wyman surveyed more than 150 industry professionals in 2026, and 70% of their companies are based primarily outside North America. Three findings stand out:

That last figure tracks what is charged for maintenance labour, not what technicians are paid. Even so, it shows the shortage has reached the invoice.

Why a technician vacancy is not filled in months

Because it takes years to train someone who can sign off work: a Part-66 licence requires passing the basic knowledge modules and building up practical experience, and certifying a specific aircraft model also requires a type rating.

In June 2026, in Madrid, IATA (International Air Transport Association) called for a review of how technicians are recruited, trained and licensed to shorten timelines, and for skills to be recognised across borders.

In our view, the real bottleneck is the time it takes a new technician to be allowed to sign, and managing that time is a job for senior management.

Why the technician shortage is a management problem

Because in maintenance, certifying staff are capacity: they determine how much work an organisation can accept and how long it takes an aircraft to return to service. That is why we believe the shortage is better tackled through planning and retention than through job advertisements, which arrive too late when a technician takes years to train.

The man-hour plan: when staffing limits what you can accept

Part-145 requires every organisation to keep a man-hour plan showing that it has enough staff for the work it is approved for; the requirement can be checked in EASA’s Easy Access Rules for Continuing Airworthiness.

The consequence? An organisation short of technicians cannot accept more work, even with an empty hangar and customers waiting. Maintenance planning therefore starts with knowing how many certifiable hours are available each month.

TAT, hangar slots and aircraft on ground (AOG)

With fewer technicians, checks take longer and hangar slots become scarce. TAT (turnaround time: the time an aircraft, engine or component spends in the shop) increases, and at the extreme comes the AOG (aircraft on ground): an aircraft grounded by a defect or a missing part that prevents its dispatch. An AOG is the top priority for maintenance and logistics.

A heavy check is run as a project, as we explain in our article on the aviation project manager, and a lack of certifying staff stretches its critical path.

Certifying staff and nominated persons cannot be improvised

Releasing an aircraft to service requires certifying staff with a licence and an authorisation from the organisation, and the management posts of a Part-145 organisation or a CAMO must be accepted by the authority.

Subcontracting can fill a gap, but in our view it does not build capacity. And there is a second constraint that comes from outside the hangar: parts.

Spare parts supply chain challenges

Spare parts are short because manufacturers have not recovered their pre-pandemic production rates: there is a record backlog of aircraft awaiting delivery, airlines are flying older fleets for longer, which need more maintenance, and engines are spending more time in the shop.

What the delays cost airlines

IATA and Oliver Wyman estimated in Reviving the Commercial Aircraft Supply Chain (October 2025) that these problems would cost airlines around USD 11 billion in 2025; in June 2026, IATA put the figure at “at least USD 11 billion”. The report breaks it down as follows:

Effect on airlines (2025) Estimated cost
Lower fuel efficiency from flying older aircraft while waiting for deliveries USD 4.2 billion
Additional maintenance of ageing fleets USD 3.1 billion
Additional engine leasing to cover longer shop visits USD 2.6 billion
Additional spare parts inventory held as a precaution USD 1.1 billion
Total USD 11 billion

The same report puts the order backlog at more than 17,000 aircraft in 2024, around 14 years of production. Two of the four cost items are maintenance costs, which makes the aviation supply chain an MRO problem too.

Engines: the most visible bottleneck

According to Oliver Wyman’s 2026 survey, narrowbody engine shop visits now regularly take 180–200 days or more for many operators. When to remove an engine, and whether to lease a spare, has become a decision for management.

When parts and hands are short at the same time

Each shortage makes the other worse. Consider a hypothetical case: the part finally arrives, but that night there is no type-rated technician to install it; or the team is ready and the part is weeks away. The maintenance manager has to choose which aircraft comes first and which spare parts are worth holding in stock.

The four levers IATA proposes

At its first World Maintenance and Engineering Symposium, held in Madrid on 24 June 2026, IATA set out four priorities:

  1. Visibility of delays, repair turnaround times and parts availability.
  2. An open aftermarket: access to independent MROs, alternative parts and approved repairs.
  3. Data, digitalisation and artificial intelligence, which we cover in our article on predictive maintenance in aviation.
  4. Human capacity: reviewing how technicians are recruited, trained and licensed.

That one of the four levers concerns people supports our argument, and raises the next question: which leaders should pull them.

Leadership roles maintenance organisations need

A maintenance organisation needs two kinds of leaders: those the regulation requires (an accountable manager and nominated persons for maintenance, compliance and safety, accepted by the authority) and those the current crisis demands (production planning, materials and reliability), able to turn staff and parts into available aircraft. This is the core of MRO management.

Role What it decides Typical background Regulatory basis (EU)
Accountable manager Resources and funding to comply with the rules; answers to the authority General or technical management Part-145 and Part-CAMO
Nominated persons (base and line maintenance, compliance, safety) Work carried out in line with the approval; independent compliance monitoring; safety management Engineering, experienced certifying technicians, quality Part-145; acceptance by the authority
Continuing airworthiness manager (CAMO) Maintenance programme, directives, what must be done and when Maintenance engineering Part-CAMO
Production planning and control Hangar slots, man-hour plan, TAT Engineering, planning Man-hour plan (Part-145)
Materials and technical logistics Inventory, suppliers, alternative parts, AOG Technical procurement, logistics Parts traceability
Reliability and data Repetitive defects, reliability programme Reliability engineering, data Maintenance programme

The roles the regulation requires

Accountable manager

Ensures that all the work can be financed and carried out in line with the rules, and answers to the authority. Both Part-145 and Part-CAMO require one. If the man-hour plan does not add up, the problem lands on this desk.

Nominated persons for maintenance, compliance and safety

Nominated persons make sure that base and line maintenance is carried out in line with the approval. A separate, independent function monitors compliance, and safety management has its own manager too.

Continuing airworthiness manager in the CAMO

Runs the maintenance programme, the control of airworthiness directives and the records. Because this role decides what must be done and when, it sets the pace of the hangars.

The roles the crisis demands

These are management posts built on regulated functions such as the man-hour plan, parts traceability and the maintenance programme. We believe this is where an engineer with business sense makes the difference.

Production planning and control

Manages hangar slots, the man-hour plan and TAT. With tight staffing, it matches airline demand to the certifiable capacity that actually exists and flags early when it will not fit.

Materials, logistics and technical procurement

Handles inventory, suppliers, alternative parts and the response to an AOG, with the traceability the rules require. With lead times measured in weeks, deciding what stock to hold is a management call.

Reliability, data and continuous improvement

Analyses repetitive defects, feeds the reliability programme and turns fleet data into decisions that anticipate problems; the data roles are described in our predictive maintenance article.

Across all these roles the shift is the same: from technical judgement (“can it be done?”) to management judgement (“what comes first, with whom and at what cost?”).

Management opportunities: five levers to attract and retain technicians

These five levers sit with those in charge, and they are where we see the professional opportunity mentioned at the start: whoever can use them will have the capacity the industry lacks today.

1. Plan the workforce the way you plan the fleet

Forecasting retirements and type ratings years ahead lets an organisation look for technicians before it needs them. Since a certifying technician takes years to train, recruiting only when the gap appears is too late. The indicator is how well the man-hour plan is covered several years out.

2. A technical career that does not require leaving to progress

Visible paths from technician to certifying staff, supervisor, planner or nominated person give people a reason to stay. In our view, this is a retention argument that does not depend on pay. Attrition per category shows whether it is working.

3. Train in-house, with training organisations and schools

Partnerships with approved maintenance training organisations (Part-147 or equivalent) and technical schools build a talent pool of your own. LATAM Airlines, for example, told the Peruvian newspaper Gestión in March 2025 that it had opened a mechanics school in São Carlos (Brazil) with an 18-month programme. What counts is how many of those technicians stay.

4. Capture the knowledge of veteran technicians

Every retirement takes away knowledge that is not in the manual. Mentoring and senior–junior pairs on checks keep it in the organisation, and we think this is one of the cheapest levers available. Its effect shows in how quickly new technicians become autonomous.

5. Measure what the shortage costs

Putting your own numbers on the problem (available hours against plan, TAT, delays caused by lack of staff, attrition) is what makes it possible to argue the case with senior management. A monthly dashboard, reviewed alongside the fleet’s, is enough.

What ICAO is doing

ICAO (International Civil Aviation Organization) runs the NGAP (Next Generation of Aviation Professionals) programme to attract, educate and retain talent; in 2025, its 42nd Assembly strengthened that mandate.

At GISS 2026, the symposium ICAO held in Marrakech in April, the panel “Let’s Talk Talent: Who Will Keep Aviation Flying?” discussed how to attract, train and retain the next generation of professionals. Javier Gándara, Honorary President of ITAérea, was among the panellists and highlighted the role of specialised schools in closing the talent gap through dedicated training and international partnerships. It was a significant event for us: at the same symposium we expanded our scholarship agreement with ICAO.

That leaves the practical question: what does a technician or an engineer need in order to manage all of this?

From the hangar to management: how to move into aviation maintenance management

Moving from technician or engineer to maintenance manager means adding management training to the technical experience you already have.

What you already bring and what you are missing

What you already bring What you are missing
Technical judgement Production planning and control
Knowledge of the aircraft and its documentation Costs and contracts with the operator
Safety culture People management
Organisational regulations: Part-145, CAMO and management system
Negotiation with suppliers
Technical and business English

Part of the right-hand column depends on where you work: the organisational rules come from EASA, the FAA, the GCAA, GACA or another national authority.

Our related training (and what we do not teach)

To be clear about what we do not do: we do not train licensed maintenance technicians and we do not run a specific MRO programme; our training in this field focuses on management.

Our Professional Master’s in Aeronautical Industry and Innovation (Máster Profesional en Industria e Innovación Aeronáutica, MI2A, on our Spanish site) covers aircraft manufacturing, maintenance and certification processes and project management in the sector; its career paths include maintenance supervision in MRO organisations.

If your field is infrastructure, our Spanish site lists courses on airport maintenance (mantenimiento de aeropuertos) and on air navigation services maintenance management (gestión del mantenimiento de servicios de navegación aérea).

Our Master in Aeronautical Big Data Management (MBDAM), online and in English from September 2027, is a master’s in aviation data management and does not train people in maintenance: one of its modules applies data management to MRO, CAMO and predictive maintenance environments. We announced its launch in November.

We are a Corporate Partner of ICAO’s TRAINAIR PLUS programme and a training centre accredited by ACI World (Airports Council International), an accreditation we renewed after the audit of 18 September 2026.

Frequently asked questions about aviation maintenance management

What does MRO mean in aviation?

MRO stands for Maintenance, Repair and Overhaul. It refers both to the industry and to the companies that maintain aircraft, engines and components, whether independent, airline-owned or manufacturer-owned. In industrial procurement the same letters mean Maintenance, Repair and Operations, which is a different thing.

What is the difference between a CAMO and a Part-145 organisation?

The CAMO decides what maintenance each aircraft needs and when: it manages the maintenance programme, the directives and the records. The Part-145 organisation carries out that maintenance and certifies release to service. Both can sit within the same company, but each needs its own approval from the authority.

What is an AOG in aviation?

AOG stands for aircraft on ground. The term is used when an aircraft is grounded by a defect or a missing part and cannot be dispatched. An AOG becomes the top priority for maintenance and logistics until the aircraft is flying again.

What should you study to lead maintenance at an airline or an MRO?

There is no single path. People who reach maintenance management are usually aeronautical, mechanical or industrial engineers or experienced certifying technicians who add management training: production planning, costs and contracts, people management, organisational regulations (Part-145, CAMO, management systems) and technical and business English.

Is there a shortage of maintenance technicians in the Middle East and Africa?

Boeing forecasts that the Middle East will need 65,000 new maintenance technicians between 2026 and 2045, and Africa 25,000. There is no official figure for the current gap in either region, so planning has to rely on long-term forecasts like this one and on each organisation’s own data.

Conclusion: whoever manages talent will manage capacity

The technician shortage is solved through management, because certifying staff are capacity. That is why we believe aviation maintenance management today is, above all, talent management, and that organisations able to plan their workforce and keep their technicians will have certifiable hours to offer when others do not.

If you come from the hangar or the technical office and want to know which management training suits your profile, write to us and we will get back to you; you can also browse our aeronautical industry programmes.

Master in Artificial Intelligence
and Digitalization for Aviation

Master of Business Administration in Aviation Management e-learning modality

Course on Airport Management

Master in Airport and Aeronautical Safety Management